TEK028 BRAKE CALIPER SILVER
Please enable the breadcrumb option to use this shortcode!
These products are designed primarily for the customisation of brake caliper and brake drums.
- Finishing product
- High gloss finish
- Extremely durable
- Excellent resistance to sunlight and colour fade
500ml Aerosol x 6
Inner Barcode 5011807047124
Outer Barcode 05011807450672
Protect all non-metallic components including seals, hoses etc, and prepare the area to be painted, if necessary, ensuring freedom from dust, grime, greases, oils etc with TEK038 Universal Degreaser or suitable alternative and allow to dry.
Do not apply when the calipers or drums are hot, or in damp or humid weather.
Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use.
Apply sparingly from a distance of 15 – 25cm. Apply 2 to 3 light coats as necessary to achieve total and even coverage, leave 15 to 30 minutes between each application.
Allow to dry for 24 hours before handling.
On completion of use, invert the can and depress the actuator for a few seconds to prevent nozzle blockage.
Note: This product must not be applied to rubber components, brake discs, pads or shoes. Should contact occur, remove immediately or replace as necessary.
After 12 hours this product cannot be re-coated for 6 weeks.
Where to use:
Designed for use primarily on brake calipers and drums.
Where not to use:
This product is designed for the use specified, and should be used only for the intended application.
TECHNICAL DATA SHEET
SAFETY DATA SHEET