TEK001 SANDING GUIDE BLACK
Please enable the breadcrumb option to use this shortcode!
A professional quality guide coat designed to assist in creating a perfectly level surface when sanding. The product is applied as a light mist over filler or primer and dries within minutes. Low spots will be highlighted by the presence of the guide coat during sanding, enabling re-filling and a professional quality repair.
PRODUCT INFORMATION
TEK001
- Preparation product
- Identifies low spots
- Fast drying and cleaner than powder
- Helps to achieve a professional quality flat finish
- Suitable for filled and / or primed repairs
500ml Aerosol x 6
Inner barcode 5011807046851
Outer barcode 05011807450405
PRODUCT APPLICATION
Prepare the primed area to be treated, ensuring freedom from dust, grime, greases, oils etc, with TEK038 Universal Degreaser or suitable alternative and allow to dry.
Use at room temperature 15 to 25 °C.
Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use.
Apply sparingly from a distance of 20 – 30cm using a smooth side to side motion, to produce a mist coat on the primed/filled surface.
Allow a few minutes for the product to dry before sanding.
Low spots will be identified by the presence of the guide coat after sanding. Apply further filler or primer and repeat the process as necessary.
On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.
Where to use:
Filled and / or primed repairs on vehicle bodywork.
Where not to use:
Surfaces treated with primers or fillers of unknown composition, without first ascertaining suitability of use.
TECHNICAL DATA SHEET
SAFETY DATA SHEET
MORE INFORMATION