+44 (0)161 627 0101

TEK020 PRE-FILL SOLVENT AEROSOL

Please enable the breadcrumb option to use this shortcode!

A specially designed pre-charged aerosol, designed to be filled with 100ml of solvent-based paint.

PRODUCT INFORMATION

TEK020

  • Preparation product
  • For custom colours
  • Universal solvent blend
  • Professional standard application from the adjustable fan spray nozzle
  • Compatible with solvent-borne coatings

400ml Aerosol x 6
Inner barcode 5011807047049
Outer barcode 05011807450597

PRODUCT APPLICATION

Note: Do not charge aerosol more than once. For best results, use charged aerosol can within 7 days.

Prepare the primed area to be treated, ensuring freedom from dust, grime, greases, oils etc, with TEK038 Universal Degreaser or suitable alternative and allow to dry.

If necessary, the surface may be flattened by abrading the surface lightly, using 1200 grade wet and dry abrasive paper, and re-clean with a solvent wipe and allow to dry.

Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use.

Apply sparingly from a distance of 20 – 25cm. Apply as many coats as necessary, typically 1 to 2 coats* to achieve total and even coverage, leaving 10 minutes between each application.

Note: Coverage dependant on colour and quality of paint. On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.

Where to use:
All types of automotive body panels for rectification and repair work.

Where not to use:
Surfaces treated with primers of unknown composition, without first ascertaining suitability of use.

TECHNICAL DATA SHEET

SAFETY DATA SHEET

MORE INFORMATION