+44 (0)161 627 0101

TEK032 HIGH GLOSS 1K SUPER CLEARCOAT

Please enable the breadcrumb option to use this shortcode!

A premium 1K acrylic clearcoat designed for use with most types of base coat.

PRODUCT INFORMATION

TEK032

  • Finishing product
  • Non-yellowing
  • Excellent durability
  • Contains UV absorbers
  • Enhanced adhesion to base coat

500ml Aerosol x 6
Inner Barcode 5011807047162
Outer Barcode 05011807450719

PRODUCT APPLICATION

Prepare the primed area to be treated, ensuring freedom from dust, grime, greases, oils etc, with TEK038 Universal Degreaser or suitable alternative and allow to dry.

If necessary, the surface may be flattened by abrading the surface lightly, using 1200 grade wet and dry abrasive paper, and solvent treated as described above to remove any dust.

Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use.

Apply sparingly from a distance of 20 – 25cm. Apply typically 2 to 3 light coats as necessary to achieve total and even coverage, leaving 10 – 15 minutes between each application.

On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.

Where to use:
All types of metallic and rigid plastics surfaces when used in conjunction with the appropriate base coat.

Where not to use:
Surfaces treated with base coats of unknown composition, without first ascertaining suitability of use.

TECHNICAL DATA SHEET

SAFETY DATA SHEET

MORE INFORMATION